pyload Support?
pyload Support?
Hello,
many thx for your Firefox extension, but i think there is one thing missing!
pyload is my favourite Downloadmanager because i can run it on my NAS...!
At the moment pyload is not supported from flashgot, maybe you can integrate it in the future?
Here is a link to the pyload project page: http://www.pyload.org
thx for reply!
greetz...!
many thx for your Firefox extension, but i think there is one thing missing!
pyload is my favourite Downloadmanager because i can run it on my NAS...!
At the moment pyload is not supported from flashgot, maybe you can integrate it in the future?
Here is a link to the pyload project page: http://www.pyload.org
thx for reply!
greetz...!
Sorry for my bad english
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:6.0) Gecko/20100101 Firefox/6.0
- Giorgio Maone
- Site Admin
- Posts: 9454
- Joined: Wed Mar 18, 2009 11:22 pm
- Location: Palermo - Italy
- Contact:
Re: pyload Support?
Putting it in my TODO list, thanks.
Mozilla/5.0 (Windows NT 5.2; WOW64; rv:5.0) Gecko/20100101 Firefox/5.0
Re: pyload Support?
Hello,Giorgio Maone wrote:Putting it in my TODO list, thanks.
thx for your work and the support for pyload (in the future) i hope!
greetz...
Sorry for my bad english
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:7.0) Gecko/20100101 Firefox/7.0
- Giorgio Maone
- Site Admin
- Posts: 9454
- Joined: Wed Mar 18, 2009 11:22 pm
- Location: Palermo - Italy
- Contact:
Re: pyload Support?
I investigated a bit, and looks like Pyload is already supported through JDownloader's native support.
If it's running locally (on localhost) you'll see "JDownloader" reported as enabled among download managers, but it's Pyload.
Otherwise, if it's running on a server different than your PC, you just need to change the flashgot.dmsopts.JDownloader.url about:config preference to
Good luck and let me know
If it's running locally (on localhost) you'll see "JDownloader" reported as enabled among download managers, but it's Pyload.
Otherwise, if it's running on a server different than your PC, you just need to change the flashgot.dmsopts.JDownloader.url about:config preference to
Code: Select all
http://your.pyload.server.domain.or.ip:9666/flashgot
Mozilla/5.0 (Windows NT 5.2; WOW64; rv:6.0) Gecko/20100101 Firefox/6.0
Re: pyload Support?
Hello,
i have changed the setting in about:config and now i get following error:
i run local no firewall, maybe this can not cause this error!
i have changed the setting in about:config and now i get following error:
i run local no firewall, maybe this can not cause this error!
Sorry for my bad english
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:7.0) Gecko/20100101 Firefox/7.0
Re: pyload Support?
If pyLoad gets an entry, it would be good to make the IP configurable more easily.
Mozilla/5.0 (X11; Linux x86_64; rv:6.0) Gecko/20100101 Firefox/6.0
Re: pyload Support?
yes, that would be great, because it is not so ideal to configure pyload over jdownloader because (i too) many have pyload AND jdownloader running i think...! My nas works great with pyload but sometimes i load with jd on my windows pc because it is easier for meRaNaN wrote:If pyLoad gets an entry, it would be good to make the IP configurable more easily.
when flashgot get REAL pyload support i think it would much better then the way over jd...!
Sorry for my bad english
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:7.0) Gecko/20100101 Firefox/7.0
Re: pyload Support?
Hi,
real PyLoad support would be great. The jdownloader workaround dosent work for me. Pyload 0.4.7. runs on Synology DS 211+.
Thanks for your nice addon!
dsieb
real PyLoad support would be great. The jdownloader workaround dosent work for me. Pyload 0.4.7. runs on Synology DS 211+.
Thanks for your nice addon!
dsieb
Mozilla/5.0 (Windows NT 6.1; rv:7.0) Gecko/20100101 Firefox/7.0
Re: pyload Support?
Hello
I don't understand
Please give details for me
I don't understand
!flashgot.dmsopts.JDownloader.url about:config preference to
Please give details for me
Mozilla/5.0 (Windows NT 6.1; rv:8.0) Gecko/20100101 Firefox/8.0
-
- Posts: 2
- Joined: Fri Jan 20, 2012 2:34 pm
Re: pyload Support?
thanks for your advice - its more or less working.
but its sending the same package like 3-5 times :/
-----
UPDATE: ok, i figured it out.
in "flashgot.dmsopts.JDownloader.path" the value has to be deleted. otherwise jdownloader will be opened and flashgot fires up the link 3-5 times, because jdownloader is not answering right with the modification of flashgot.dmsopts.JDownloader.url
when the jdownloader-path is deleted firefox says "cannot open jdownloader" , but pyload got the link 1 time and flashgot stops trying to send the link to jdownloader.
but still, i would really appreciate this to be native in flashgot.
would be a reason to donate
----
PS.
but till then, there is a workaround. just open jdownloader and copy the link without flashgot. jdownloader monitors the clipboard and get the links. still not perfekt, but good enough.
but its sending the same package like 3-5 times :/
-----
UPDATE: ok, i figured it out.
in "flashgot.dmsopts.JDownloader.path" the value has to be deleted. otherwise jdownloader will be opened and flashgot fires up the link 3-5 times, because jdownloader is not answering right with the modification of flashgot.dmsopts.JDownloader.url
when the jdownloader-path is deleted firefox says "cannot open jdownloader" , but pyload got the link 1 time and flashgot stops trying to send the link to jdownloader.
but still, i would really appreciate this to be native in flashgot.
would be a reason to donate
----
PS.
write "about:config" in the url-bar. then search for "jdownloader"lemarec56 wrote:Hello
I don't understand!flashgot.dmsopts.JDownloader.url about:config preference to
Please give details for me
right.KoLSMS wrote: yes, that would be great, because it is not so ideal to configure pyload over jdownloader because (i too) many have pyload AND jdownloader running i think...! My nas works great with pyload but sometimes i load with jd on my windows pc because it is easier for me
when flashgot get REAL pyload support i think it would much better then the way over jd...!
but till then, there is a workaround. just open jdownloader and copy the link without flashgot. jdownloader monitors the clipboard and get the links. still not perfekt, but good enough.
Last edited by snickers2k on Thu Apr 19, 2012 2:19 pm, edited 1 time in total.
Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:9.0.1) Gecko/20100101 Firefox/9.0.1
Re: pyload Support?
Native support would be great, because of using pyLoad on NAS-box and jDownloader local!
Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:15.0) Gecko/20100101 Firefox/15.0.1
[RELEASE] FlashGot + native pyLoad support
I took the freedom and added pyLoad as an own download manager to FlashGot.
Feel free to download FlashGot + pyLoad support version 1.5.3 from:
https://code.google.com/p/flashgot-pgoeri
If pyLoad is running on your local machine, it will detect it automatically.
If pyLoad is running on another host (e.g. NAS), you will need to change the URL once in the page about:config in firefox:
flashgot.dmsopts.pyLoad.url
=http://<ip or hostname>:9666/flashgot
DO NOT add an slash at the end!
@GM
I hope you apply my changes to the next official release. Here's an unified diff:
http://flashgot-pgoeri.googlecode.com/f ... goeri.diff
Feel free to download FlashGot + pyLoad support version 1.5.3 from:
https://code.google.com/p/flashgot-pgoeri
If pyLoad is running on your local machine, it will detect it automatically.
If pyLoad is running on another host (e.g. NAS), you will need to change the URL once in the page about:config in firefox:
flashgot.dmsopts.pyLoad.url
=http://<ip or hostname>:9666/flashgot
DO NOT add an slash at the end!
@GM
I hope you apply my changes to the next official release. Here's an unified diff:
http://flashgot-pgoeri.googlecode.com/f ... goeri.diff
Last edited by pgoeri on Thu Jan 16, 2014 11:22 pm, edited 2 times in total.
Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:18.0) Gecko/20100101 Firefox/18.0
Re: pyload Support?
@pgoeri
It's not working for me.
Could you explain which port i have to choose (is 9666 the Webinterface or the Remote Port ?)
And why i have to put /flashgot behind the URL is there any plugin for pyload that recognizes this string ?
Maybe you can build a tutorial and put it on your Google Code Site.
thx.
It's not working for me.
Could you explain which port i have to choose (is 9666 the Webinterface or the Remote Port ?)
And why i have to put /flashgot behind the URL is there any plugin for pyload that recognizes this string ?
Maybe you can build a tutorial and put it on your Google Code Site.
thx.
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:18.0) Gecko/20100101 Firefox/18.0
Re: pyload Support?
9666 is the port of the "ClickAndLoad" plugin, which provides via the subindex /flashgot the possibility for other tools to add links to pyLoad. Similar as JDownloader does via the ClickAndLoad plugin.retober wrote: Could you explain which port i have to choose (is 9666 the Webinterface or the Remote Port ?)
And why i have to put /flashgot behind the URL is there any plugin for pyload that recognizes this string ?
I updated my version of FlashGot:
* pyLoad is now always active in the download manager dropdown
* now you can set the URL via the settings screen
Download from: http://code.google.com/p/flashgot-pgoeri/downloads/list
I also created a tutorial for setting everything up:
http://code.google.com/p/flashgot-pgoer ... tForPyLoad
Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:18.0) Gecko/20100101 Firefox/18.0
-
- Posts: 2
- Joined: Fri Jan 20, 2012 2:34 pm
Re: pyload Support?
+1 - for native implementation of this script !
grat job pgoeri
grat job pgoeri
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_2) AppleWebKit/537.17 (KHTML, like Gecko) Chrome/24.0.1312.56 Safari/537.17