PM senttherube wrote:Set the share to [only those who know the URL] (or whatever it says) & pm me the link.
JSView 2.0.5-mod for SeaMonkey 2.0+ and Firefox 3.5+
Re: JSView 2.0.5-mod for SeaMonkey 2.0+ and Firefox 3.5+
*Always* check the changelogs BEFORE updating that important software!
Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:31.0) Gecko/20100101 SeaMonkey/2.28
Re: JSView 2.0.5-mod for SeaMonkey 2.0+ and Firefox 3.5+
> got it
Got it.
New link: https://drive.google.com/open?id=0B3rgc ... authuser=0
> works?
Yes.
Names, sizes, pages open.
SeaMonkey 2.29, tried in two different Profiles.
> someone who ran Windows, it ended up being the culprit for a (at least) 30 second hang on quit.
Not seeing that.
Two Profiles.
Smaller ~200 MB RAM usage, Quit fine.
Larger ~1.6 GB RAM usage, Quit fine.
Now on yet another Profile, that had an older (& no longer working) version of JSView installed, when I Quit that, it seemed, to take an intolerably long time to finally exit. At first I thought it was going to hang. Now if it was JSView related, or just extended housekeeping or just what, can't say. And not enough experience yet with 2.29 to say or to point to anything in particular. Or it may just have been a fluke.
> Google Drive
Can't help you with that. I know really nothing of it.
Don't like it. Don't like any of those types of services.
None work the way I do, so I only put up with them, because.
Got it.
New link: https://drive.google.com/open?id=0B3rgc ... authuser=0
> works?
Yes.
Names, sizes, pages open.
SeaMonkey 2.29, tried in two different Profiles.
> someone who ran Windows, it ended up being the culprit for a (at least) 30 second hang on quit.
Not seeing that.
Two Profiles.
Smaller ~200 MB RAM usage, Quit fine.
Larger ~1.6 GB RAM usage, Quit fine.
Now on yet another Profile, that had an older (& no longer working) version of JSView installed, when I Quit that, it seemed, to take an intolerably long time to finally exit. At first I thought it was going to hang. Now if it was JSView related, or just extended housekeeping or just what, can't say. And not enough experience yet with 2.29 to say or to point to anything in particular. Or it may just have been a fluke.
> Google Drive
Can't help you with that. I know really nothing of it.
Don't like it. Don't like any of those types of services.
None work the way I do, so I only put up with them, because.
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball NoScript FlashGot AdblockPlus
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:32.0) Gecko/20100101 Firefox/32.0 SeaMonkey/2.29
Re: JSView 2.0.5-mod for SeaMonkey 2.0+ and Firefox 3.5+
If you could clarify the mod-notes, in particular these:
> *** DROPPING SUPPORT FOR GECKO < 27 ***
Now does this mean it won't work, or only that you haven't tested?
> ** Gecko < 32: this addon now requires browser.cache.use_new_backend set to 1 **
So in order to use this with < 32, you must manually set the cache Pref (which will not be default until 32)?
Any particular reason to specifically need to use one over the other?
Any problems when/if the name of the Pref (browser.cache.use_new_backend) changes (which I believe ? is FF's intent at some point)?
(I'm not going to link to mozillazine until tomorrow at the earliest.)
> *** DROPPING SUPPORT FOR GECKO < 27 ***
Now does this mean it won't work, or only that you haven't tested?
> ** Gecko < 32: this addon now requires browser.cache.use_new_backend set to 1 **
So in order to use this with < 32, you must manually set the cache Pref (which will not be default until 32)?
Any particular reason to specifically need to use one over the other?
Any problems when/if the name of the Pref (browser.cache.use_new_backend) changes (which I believe ? is FF's intent at some point)?
(I'm not going to link to mozillazine until tomorrow at the earliest.)
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball NoScript FlashGot AdblockPlus
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:32.0) Gecko/20100101 Firefox/32.0 SeaMonkey/2.29
Re: JSView 2.0.5-mod for SeaMonkey 2.0+ and Firefox 3.5+
Well, you couldn't have, because it turns out the issue is two custom (personal) addons (not JSView)therube wrote:> Google Drive
Can't help you with that.
*sigh* I'll have to investigate later when I get time.
It means I used APIs (HTTP Cache 2) that weren't available until Gecko 27 (https://bugzilla.mozilla.org/show_bug.cgi?id=913807), and I didn't write a fallback for if those APIs are unsupported.therube wrote:If you could clarify the mod-notes, in particular these:
> *** DROPPING SUPPORT FOR GECKO < 27 ***
Now does this mean it won't work, or only that you haven't tested?
I don't understand what you're asking, please clarify this question.therube wrote:> ** Gecko < 32: this addon now requires browser.cache.use_new_backend set to 1 **
So in order to use this with < 32, you must manually set the cache Pref (which will not be default until 32)?
Any particular reason to specifically need to use one over the other?
Don't think so, because Gecko >= 32 doesn't even have the option of the old cache AFAIK (so there's no pref that I'm aware of).therube wrote:Any problems when/if the name of the Pref (browser.cache.use_new_backend) changes (which I believe ? is FF's intent at some point)?
*Always* check the changelogs BEFORE updating that important software!
Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:31.0) Gecko/20100101 SeaMonkey/2.28
Re: JSView 2.0.5-mod for SeaMonkey 2.0+ and Firefox 3.5+
> ** Gecko < 32: this addon now requires browser.cache.use_new_backend set to 1 **
Well I suppose a 32 user could specifically not want to use the new_backend, set the value to 0, in which case it would revert back to the old /cache/ ?
Well I suppose a 32 user could specifically not want to use the new_backend, set the value to 0, in which case it would revert back to the old /cache/ ?
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball NoScript FlashGot AdblockPlus
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:32.0) Gecko/20100101 Firefox/32.0 SeaMonkey/2.29
Re: JSView 2.0.5-mod for SeaMonkey 2.0+ and Firefox 3.5+
...and the JSView I sent you wouldn't work
*Always* check the changelogs BEFORE updating that important software!
Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:31.0) Gecko/20100101 SeaMonkey/2.28
Re: JSView 2.0.5-mod for SeaMonkey 2.0+ and Firefox 3.5+
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball NoScript FlashGot AdblockPlus
Mozilla/5.0 (Windows NT 5.1; rv:32.0) Gecko/20100101 SeaMonkey/2.29
Re: JSView 2.0.5-mod for SeaMonkey 2.0+ and Firefox 3.5+
Thanks.
Note that 11522914 === me (didn't think an 8-digit number would be a good forum nickname ) and that I did *not* ever test that JSView with Firefox or even PaleMoon (there's no PaleMoon version based on recent enough Gecko) at all...
Note that 11522914 === me (didn't think an 8-digit number would be a good forum nickname ) and that I did *not* ever test that JSView with Firefox or even PaleMoon (there's no PaleMoon version based on recent enough Gecko) at all...
*Always* check the changelogs BEFORE updating that important software!
Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:31.0) Gecko/20100101 SeaMonkey/2.28